Stockport Site Massing Model by Finbar Charleson

This project looks at a site sandwiched between exiting buildings and natural boundaries in Stockport centre. As with most of the projects I have seen Fin work on it’s great to see someone using a variety of media on their desk to inform the decisions in making and in turn use the results to influence their ideas.

As the site includes several large tower blocks it was decided to create the masses as hollow boxes to both save on material and weight of the completed model. The box sections seen here were carefully made up from planes of material – most of it scraps from other projects. 

Once again being concious of material use, Fin designed his contour base to be laser cut into steps with supports as opposed to entire sheets. This again saves material and overall weight. The process requires some minimal extra consideration when producing drawings but the savings are great and well worth the effort. Read more on this method of construction here.

To create the imposing and dominating viaduct feature which spans across the site Fin chose to use a solid mass created from pine. The arches were drawn out and rough cut on the bandsaw before being sanded smooth.  Legs for the viaduct were created as separate pieces with varied heights depending on their position across the contours. The legs were then clamped and glued over night.

Finbar gave us a few words reflecting on the project so far:

‘The model has helped to negotiate a complicated landscaping condition, in that the envelope links three different levels: water, ground and the 1st floor gardens, of a proposed Waste Water Treatment Plant in Stockport city centre. The context is modelled with traditional craft methods as I feel the site has a great sense of history, including the famous  Stockport Viaduct. It has helped to explore sensitive ways of repurposing existing warehouses I used Pepakura software to produce nets of meshes generated in Grasshopper for Rhinoceros, for the initial massing proposals.
The next step is to combine the spatial arrangements of the building with environmental analysis and try new massings on the same model.’

The completed model has a removable site section to allow different proposals to be inserted into context. Fin has already made several suggested forms from card as seen below. Finbar Stockport Model (15) Finbar Stockport Model (16)Finbar Stockport Model (18) Finbar Stockport Model (17)

 

 

‘Extreme Conditions’ Predictive Contour Model

Stockport Contour Model (3)

This 3rd Year contour model of a site in Stockport has been made to demonstrate the effects of pollution in the area. Smoke, trapped in the lower box section of the model will escape through holes on the base of the site representing pollution from the area. The river area will eventually be flooded and show and overspill to the surrounding urban area.

Models of this kind are described as being ‘Predictive models’ in that they are attempting to show how a change may occur over time. The process of ‘flooding’ on this model will likely result in its destruction so it’s life will be short.

Stockport Contour Model (4) Stockport Contour Model (6) The group used laser cut MDF to build up the site contours and band saw cut MDF for the site roadway. The buildings were made from Jelutong wood blocks and the base box from band saw cut acrylic with acrylic square section.

Stockport Contour Model (7) Stockport Contour Model (8) Stockport Contour Model (10) Stockport Contour Model (11)