Hi All,
Hope you have had a good break and time to recoup for the next few months.
Part of the UoM server went down over the break resulting in our blog going down but thankfully everything is intact and we are back online. Apologies for any inconvenience this caused anyone.
****Workshop Opening Times January/February****
This year we will be hosting one of the 5th year workshops between 25th January and Monday 8th February.
This will mean a shorter working day for these two weeks with the workshop only opening from 11.00 till the normal closing time of 16.30.
New Materials
We have a couple of new additions to our materials stock this term which as usual are subject to availability so be sure to check before beginning your project planning
Finnboard
Anyone who has been inducted this year or last will have been told about this product which 4D Stock. This pulp board has a great range of applications due to its ability to form shapes when wet which are maintained when the board dries. Recommended for sketch and development models but there’s no reason it couldn’t be used for more advanced models as well.
Metal Effect Silver Styrene Sheet
One of the most common questions asked of what can be cut on the laser cutters is metals. Whilst this isn’t possible we have bought in this substitute which is a metallic styrene plastic sheet. This can be laser cut and worked as with other styrene or acrylic sheeting and should serve as a suitable alternative for some cases.
Scale Trees
We have a small selection of high quality brass etched and flocked scale trees. These are available from 4D Modelshop in a much wider range of sizes and styles. Samples of those available from 4D Can be seen in the workshop. We have a small stock of the following:
Medium Green, Copper Beech, Cork, White and Bare Branch
Don’t forget to register for your 10% student discount if you buy anything from them quoting either myself or Jim as your tutor when asked.
New Reference Book
Advanced Mouldmaking and Casting, Nick Brooks, 2011
This book provides a thorough guide with case studies of mouldmaking and casting with a variety of materials. Whilst our facilities of this are limited we hope this book will guide you to approach this method with more confidence as well as see what is possible outside of a workshop environment. As with all our books you are welcome to use as reference within the workshop but please don’t take out.
See you all soon,
Scott and Jim